FRZ MA+RSI EA – User Manual

Before You Start

  • Enable AutoTrading (MT4) or Algo Trading (MT5) in your trading platform.
  • The EA is free. It needs no license and no WebRequest (internet URL) setup.
  • The EA trades the symbol and timeframe of the chart it is attached to. It runs on any timeframe, but it was designed for H1 (1-hour) charts, and H1 is the recommended timeframe. Recommended pairs: EURUSD and GBPUSD.
  • One chart trades one pair. To trade more pairs, open one chart per pair and attach the EA to each.
  • For MT5, a hedging account is recommended. On a netting account the averaging (DCA) trades merge into one position.
  • Before trading live, run the EA in the Strategy Tester and on a demo account.

Installation

MT4 Installation

  1. Download the MT4 version of the EA and unzip it.
  2. In MT4, click File > Open Data Folder and copy the .ex4 file into MQL4/Experts.
  3. Restart MT4, or right-click Expert Advisors in the Navigator panel and select Refresh.
  4. Open an H1 chart of the pair you want to trade and drag the EA onto it. On the Common tab, tick Allow live trading.
  5. Click the AutoTrading button on the toolbar so it turns green.

MT5 Installation

  1. Download the MT5 version of the EA and unzip it.
  2. In MT5, click File > Open Data Folder and copy the .ex5 file into MQL5/Experts.
  3. Restart MT5, or right-click Expert Advisors in the Navigator panel and select Refresh.
  4. Open an H1 chart of the pair you want to trade and drag the EA onto it. On the Common tab, tick Allow Algo Trading.
  5. Click the Algo Trading button on the toolbar so it turns green.

Quick Specifications

Product name FRZ MA+RSI EA
Platform supported MT4 & MT5
Trading pair(s) Any symbol, one per chart – EURUSD and GBPUSD recommended
Minimum leverage The higher, the better – use the highest leverage available. However, 1:100 can be recommended as the bare minimum, because the EA can hold up to 25 averaging trades. Consider increasing your deposit if your leverage is only at the bare minimum.
VPS requirement

This software needs to run 24/7. A Windows VPS is recommended unless you can keep your own PC running continuously 24/7 – For a VPS, we can recommend this VPS provider. You can purchase the cheapest VPS Windows package with this provider (4GB RAM is usually enough as a minimum). More instructions on buying and setting up VPS are given on our VPS page.

HUD / On-Chart Panel

FRZ MA+RSI EA HUD panel on an EURUSD H1 chart

The panel at the top-left of the chart shows what the EA is doing on this chart. Long lines wrap onto the next line.

HUD Item Meaning
FRZ MA+RSI EA v… Product name and the version you are running.
Status WAITING FOR SIGNAL (green) – no trades are open and the EA is waiting for a setup; normal.
IN TRADE (BUY) / IN TRADE (SELL) (green) – trades are open on this chart.
OUTSIDE TRADING HOURS (orange) – the current time is outside EA Start/Stop Time. Open trades are still managed; no new first trade opens.
DD STOP LOSS HIT (red) – the Drawdown Stop Loss closed this chart’s trades within the last hour.
CHECK MA PERIODS (red) – the Fast and Slow MA periods are 0 or the same. No trades are opened. See settings 6 and 7.
Symbol The chart symbol and timeframe the EA trades, e.g. EURUSD H1.
Open Trades Number of this EA’s open trades on this chart (first trade + averaging trades).
Balance Account balance.
Open P/L Floating profit/loss of this chart’s open trades, including swap. Green when 0 or above, red when negative.
Current DD This chart’s floating loss as a % of the balance. Example: a loss of $50 on a $10,000 balance shows 0.50%.
DCA On (3/25) means averaging is enabled and 3 of the maximum 25 trades are open. Off when Enable DCA is false.
DD Stop Loss The Drawdown Stop Loss setting, or Off when it is 0.
Break Even The Breakeven Level setting, e.g. 85% of TP (single trade), or Off when it is 0.
RSI The current RSI value with your buy and sell levels, e.g. RSI: 52.3 (Buy > 45, Sell < 55).
Spread The current spread in pips and your Max Spread setting. Red when the spread is too wide for new trades.
Volatility OK – the market is moving enough for a new first trade.
Squeeze, no new trades (orange) – the built-in choppy market filter sees a quiet, sideways market and holds back new first trades. Open trades are still managed.
Trading Hours Your EA Start/Stop Time, with (closed) added when the current time is outside it.
Last The last action on this chart, e.g. Last: Buy opened, Last: DCA trade 2 opened, Last: Break even set on #123456, Last: Closed: Take Profit or Last: Closed: Fast MA crossed below slow MA.
News Filter / Recovery Always Not Used – this EA has no news filter and no recovery module.

Input Settings

A basket below means all of this EA’s open trades on one chart: the first trade plus any averaging (DCA) trades. ATR (Average True Range) is the average size of the last 14 candles of the chart’s timeframe – for EURUSD H1 often around 8-15 pips.

No. Setting Explanation
General Trading Settings
1 Initial Lot Size The lot size of the first trade of each basket. Default 0.10. Averaging trades use the lot from setting 13. The lot is rounded to your broker’s lot step and kept between the broker’s minimum lot and setting 2. Keep it in line with your deposit: we suggest about 0.01 lot per $100.
Example: balance $3,000 -> Initial Lot Size 0.03. With the default DCA settings the basket can grow to 25 x 0.03 = 0.75 lots (see setting 12).
2 Maximum Lot Size per Trade The largest lot any single trade may use. Default 10. It only matters when the DCA Lot Multiplier (setting 13) grows the lots: a trade that would be larger is opened at this size instead.
Example: first lot 0.10, multiplier 2.0, maximum 0.50 -> 0.10, 0.20, 0.40, 0.50, 0.50 …
3 Take Profit (ATR Multiplier) Profit target as a multiple of ATR, measured on the candle before the newest trade opened. Default 3.0. All trades of a basket share one take profit, which moves closer to the average entry price as more averaging trades are added: the distance is divided by the number of trades. Once a basket has more than 3 trades, the EA closes it as soon as it is in profit. A basket that has been open for 5 trading days also closes as soon as it is in profit.
Example: ATR 12 pips, Take Profit 3.0. One trade -> take profit 36 pips from entry. Three trades -> take profit 36 / 3 = 12 pips beyond their average entry price.
Higher = bigger but fewer wins. Lower = smaller, more frequent wins.
4 Stop Loss (ATR Multiplier, Used When DCA Is Off) Stop loss of the trade as a multiple of the current ATR, set when the trade opens. Default 2.0. It is used only when Enable DCA (setting 10) is false – with DCA on, a stop loss would close the trade before any averaging trade could open, so trades open without one and the Drawdown Stop Loss (setting 14) is the protection instead. 0 = no stop loss.
Example: DCA off, ATR 12 pips, Stop Loss 2.0 -> stop loss 24 pips from entry.
5 Breakeven Level (% of Take Profit, Single Trade, 0 = Off) When a single open trade has moved this % of the way to its take profit, the EA moves its stop loss to the entry price, so the trade can no longer turn into a loss. Default 85. 0 = off. It applies only while the basket has one trade; once averaging trades are added, the shared take profit and the Drawdown Stop Loss manage the basket.
Example: take profit 36 pips away, setting 85 -> at 36 x 0.85 = 30.6 pips of profit the stop loss moves to the entry price.
Signal Settings
6 Fast MA Period Period of the fast (shorter) moving average used for the moving average cross. Default 10. It must be above 0 and different from setting 7, or the HUD shows CHECK MA PERIODS and no trades open. A single open trade also closes early when the moving averages cross back the other way (HUD: Closed: Fast MA crossed below slow MA / above slow MA).
7 Slow MA Period Period of the slow (longer) moving average. Default 20. Keep it larger than setting 6.
Example: 20 and 50 -> slower, fewer signals than the default 10 and 20.
8 Sell Only if RSI Is Below A sell may only open while the RSI (14) is below this level. Default 55. Lower = stricter, fewer sells.
9 Buy Only if RSI Is Above A buy may only open while the RSI (14) is above this level. Default 45. Higher = stricter, fewer buys.
Example: RSI is 50 -> with the defaults both a buy (50 > 45) and a sell (50 < 55) are allowed by the RSI check. Set Buy to 55 and Sell to 45 to allow buys only above 55 and sells only below 45.
DCA Settings
10 Enable DCA DCA (dollar-cost averaging) adds trades at better prices when the market moves against the basket, which lowers its average entry price. true (default) = on. false = each basket is a single trade with the ATR stop loss (setting 4) and take profit.
11 DCA Step (ATR Multiplier) How far price must move against the newest trade before the next averaging trade, as a multiple of ATR at the time the newest trade opened. Default 2.0. The EA also waits for a short confirmation, and opens at most one averaging trade per candle.
Example: ATR 10 pips, DCA Step 2.0 -> the next buy opens about 20 pips below the newest buy.
Higher = fewer, wider-spaced averaging trades (safer). Lower = tighter grid, more trades.
12 Max Trades (incl. Initial Trade) The maximum number of trades in one basket, counting the first trade. Default 25. When reached, no more averaging trades open; the basket waits for its take profit (or the Drawdown Stop Loss).
Example: Initial Lot Size 0.10, multiplier 1.0, Max Trades 25 -> at most 2.50 lots open on this chart. Make sure your margin can carry that, or lower this setting.
13 DCA Lot Multiplier Each averaging trade’s lot = the previous trade’s lot x this value. Default 1.0 = every trade uses the same lot. Values above 1.0 grow the lots (martingale-style) and raise the risk quickly; they are capped by setting 2.
Example: first lot 0.10, multiplier 1.1 -> 0.11, 0.12, 0.13 … (each rounded to your broker’s lot step).
Drawdown Stop Loss Settings
14 Drawdown Stop Loss (% of Balance, 0 = Off) Closes all trades of this chart’s basket when its floating loss (including swap; on MT4 also commission) reaches this % of the balance. Default 0 = off: with DCA on, baskets are then never closed at a loss. It applies per chart, not to the whole account. After it triggers, the HUD shows DD STOP LOSS HIT for one hour.
Example: balance $10,000, setting 10 -> the basket is closed when it is $1,000 down.
Filter Settings
15 Max Spread (Pips) No new trades (first or averaging) open unless the spread is below this. Default 5 pips. Must be above 0 – at 0 no trades can open.
Example: GBPUSD spread is 5.4 pips, setting 5 -> the EA waits until the spread is below 5 pips.
16 EA Start Time (Broker Time) Time of day from which the EA may open a new first trade, in your broker’s server time (the time shown in Market Watch). Format HH:MM, 24-hour. Default 00:01.
Example: European session only -> Start 09:00, Stop 17:00 on a GMT+2 broker. Wrong: 9am or 09.00 – an unreadable time switches the time filter off.
The time filter only blocks new first trades. Open trades are always managed, and averaging trades can still open.
17 EA Stop Time (Broker Time) Time of day after which no new first trade opens. Same format, default 23:59. A window that crosses midnight works too.
Example: Start 22:00, Stop 06:00 -> new trades only between 22:00 and 06:00 server time.
Do not set Start and Stop to the same time – that blocks all new first trades.
Misc Settings
18 Magic Number An ID number the EA writes on its trades so it only manages its own. Default 8377. Each chart manages only its own symbol, so several charts can share the same number. Change it only if another EA on the same account and symbol also uses 8377.

Set Files

FRZ MA+RSI EA does not use .set files. Most settings (ATR-based distances, drawdown thresholds, etc.) are dynamic and adapt to your account balance and current market conditions, so a fixed .set file would not reflect the correct values for your account. Use the Input Settings table above as your starting configuration instead.

Troubleshooting

Issue What to check
EA is attached but opens no trades 1. AutoTrading / Algo Trading is on (green button) and live trading is allowed on the EA’s Common tab.
2. Waiting is normal: a new trade needs a fresh moving average cross plus the RSI and the EA’s other checks to agree, which can take days on H1.
3. Status is not OUTSIDE TRADING HOURS (settings 16-17) or CHECK MA PERIODS (settings 6-7).
4. The HUD shows Volatility: OK. During quiet, sideways markets the EA holds back new trades.
5. The spread is below Max Spread (setting 15). Red Spread row = too wide.
HUD shows CHECK MA PERIODS Fast MA Period or Slow MA Period is 0, or both are the same. Set two different periods above 0, e.g. 10 and 20.
A trade closed with a small profit or loss before its take profit A single trade closes when the moving averages cross back the other way (HUD: Last: Closed: Fast MA crossed ...), or at its entry price after break even (setting 5). Both are normal exits.
No stop loss on my trades Normal while Enable DCA is true: averaging trades take the place of a stop loss. Use the Drawdown Stop Loss (setting 14) to cap the loss, or set Enable DCA to false to use the ATR stop loss (setting 4).
Lot size is bigger than expected on a small account The lot is never below your broker’s minimum lot (usually 0.01). Lower the Initial Lot Size, use a cent account or increase the deposit.
MT5: only one position although several DCA trades opened The account is a netting account, which merges trades in the same symbol. Use a hedging account.
Settings look wrong after updating the EA MetaTrader can keep old input values when a new version is attached. Remove the EA from the chart, attach it again and click Reset on the Inputs tab before changing any setting.
Experts/Journal tab shows [OrderSend] Failed (MT4) or [OrderSend] Failed ... retcode= (MT5) The broker rejected the trade. The error/retcode number explains why – most often not enough margin, the market is closed, or trading is disabled for the symbol.

Get Support

Online AI chat: https://t.me/FRZSupportBot
Discord Forum: https://www.frzsoftware.com/discord

Recommended VPS: https://www.frzsoftware.com/getvps
Join VIP Club: https://www.frzsoftware.com/vipclub
Social Links: https://www.frzsoftware.com/socials

Disclaimer

Our software is provided “as is”, without any warranty or condition of any kind, express, implied or statutory. You are advised to do necessary testing on demo accounts before using the software on a live account. Trading carries a high level of risk to your capital and you should only trade with money you can afford to lose. Past performance of any trading system is not necessarily indicative of future results.

Was this page helpful?
0
0
Your Cart
Your cart is emptyReturn to Shop